The new Model CIBD-100 and CIBD-100-H Columbia ion beam deflector (90 degree) is released.
The new model BOS-25-IW image wedge is released to compliment the BOS beam observation image wedge line. Now image wedge units are available in 18mm, 25mm, 40mm and 75mm formats.
Colutron Ion Beam Products are now being offered by Beam Imaging Solutions. Complete ion gun systems with controllers featuring either the standard Colutron filament ion sources or the new Beam Imaging Solutions RF ion source are available as an option. The standard Colutron ion gun type systems are now being offered in either a 10keV (standard Colutron) or 20 keV (improved) ion beam energy configuration.
Spare parts for both legacy Colutron quartz and boron nitride ion source or new ceramic type ion source are available.
The new RF-100 Power Supply Control Unit is now available. The RF-100 is made to replace the Colutron DC ion source power supplies (anode, filament) for customers who have a Colutron model E-1 or E-2 ion gun controller and are converting their system to operation with the RFIS-100 ion source.
The Colutron model GR-3-6 velocity filter control unit has been upgraded from 325V to 1000V operation. This allows for a much stronger electric field for the Colutron velocity filters and can greatly enhance mass resolution. The new velocity filter control unit, model GR-3-6-1000 is now available from Beam Imaging Solutions.
The new BOS-75-IW (75mm) Image Wedge is released to complement the existing BOS-18-IW (18mm) and BOS-40 (40mm) Image Wedges. The Image Wedges are typically used to observe a beam at 90 degrees using a mirror mounted at 45 degrees to the beam axis. The BOS-IW units can be pushed into and out of the beam line so that the spatial profile of the beam can then be viewed through a viewport at 90-degrees w.r.t the beam axis. The Image Wedge units are most useful for imaging applications inside the vacuum system when a fixed flange mount imager may not be suitable.
The new DCIS-103 and DCIS-103-2 Colutron® type Heat Sinks are released. These Heat Sinks can generate an axial magnetic field in the discharge region with an electric solenoid magnet.
The new DCIS-100 and DCIS-101 Colutron type ion source assemblies are released. These ion sources are of the Colutron® DC filament type with Al2O3 (Ceramic) construction.
The new model BOS-40-8 with 40mm diameter active area is now available with 8″conflat mount.
The new model RFIS-100 ion source assembly is now available. The RFIS-100 is a RF ion source operating at 13.56 MHz. It is designed to be retrofittable to the standard Colutron® model G-1 and G-2 ion gun systems. Customers that do not already own a Colutron ion gun can purchase the new source to fit to their own ion accelerator systems. More information can be found at www.beamimaging.com/RFIS.html.