BOS Quote Form Required fields are marked with * Quotation Type Type:* Formal QuotePrices Only Standard Systems Systems: BOS-18, Beam Observation System, 18mm Diameter Imaging Area (Chamber: welded window,2.75" Conflat®)BOS-18-FO, Beam Observation System, 18mm Diameter Imaging Area (Fiberoptic window, 2.75" Conflat®)BOS-18-IW, Beam Observation System, 18mm Diameter Imaging Area, Image Wedge, 90-Degree ImagingBOS-25, Beam Observation System, 25mm Diameter Imaging Area (welded window, 4.50" Conflat®)BOS-25-FO, Beam Observation System, 25mm Diameter Imaging Area, (Fiberoptic window, 4.50" Conflat®)BOS-25-IW, Beam Observation System, 25mm Diameter Imaging Area, Image Wedge, 90-Degree ImagingBOS-25-6, Beam Observation System, 25mm Diameter Imaging Area (welded window, 6.00" Conflat®)BOS-25-6-FO, Beam Observation System, 25mm Diameter Imaging Area, (Fiberoptic window, 6.00" Conflat®)BOS-40, Beam Observation System, 40mm Diameter Imaging Area (Chamber: welded window,4.50" Conflat®)BOS-40-FO, Beam Observation System, 40mm Diameter Imaging Area (Fiberoptic window, 4.50" Conflat®)BOS-40-6, Beam Observation System, 40mm Diameter Imaging Area (welded window, 6.00" Conflat®)BOS-40-6-FO, Beam Observation System, 40mm Diameter Imaging Area (Fiberoptic window, 6.00" Conflat®)BOS-40-IW, Beam Observation System, 40mm Diameter Imaging Area, Image Wedge, 90-Degree ImagingBOS-75, Beam Observation System, 75mm Diameter Imaging Area (welded window, 8.00" Conflat®)BOS-75-FO, Beam Observation System, 75mm Diameter Imaging Area (Fiberoptic Window, 8.00" Conflat®)BOS-75-IW, Beam Observation System, 75mm Diameter Imaging Area, Image Wedge, 90-Degree Imaging Options MCP Dual MCP, (OPT-01). Impedance matched MCPs, (Dual MCP option only). MCP Coating, (Input Side).Choose from CsI, CuI, MgF2, MgO, KBr, Cu, and Au Pitch.Choose 3, 6, 10, 12 or 32 Bias AngleChoose 0, 5, 8, 12 or 19 Deg. Aspect RatioChoose 60:1 or 80:1 Extended Platform Mount Extended Platform MountMCP Front surface to Flange vacuum side surface distance (mm) Phosphor Screen P-43 (15 micron) with Aluminum (500Å) overcoat standard Phosphor TypePlease state desired phosphor type and conductive coating type if required Metal Anode in place of Phosphor Screen, pareticle detection applictations. (Reduces cost of base system. Usually specified with no viewport chamber option (see below)) Vacuum Chamber Viewport Type Standard window is welded pyrex glass window. Options included: Pyrex, Removeable.Quartz, Removeable.Fused Silicia, Removeable.Sapphire, Removeable.Fiberoptic/phosphor screen window, removeable.No Viewport (Reduces cost of base system. Normally specified with metal anode for particle detection only). Feedthroughs Standard feedthroughs are MHV, 5kV with feedthrough orientation out of EDGE of flange. SHV, 5kV. (All Feedthroughs)SHV-B, 7.5kV. (Phosphor Screen)SHV-10, 10kV. (Phosphor Screen)50 Ohm BNC Feedthrough for metal anode connection. Particle detection systems with metal anode configuration.Feedthrough orientation- Out of FACE of flange (Normal configuration is out of flange endge) Imager/Detector Shield MCP/Phosphor screen assembly has a shield assembly at front of imager/detector to shield MCP/phosphor potentials from incoming beam. This shield is normally grounded to vacuum chamber. Floating Shield. Attached to MCP front connection. Allows MCP front to be biased to a potential other than ground. Beam Attenuation Grids for prolonging MCP life Ion beams greater than 3.2 nA/mm2, 90% beam attenuation (1 grid)Ion beams greater than 31.8 nA/mm2, 99% beam attenuation (2 grids)Ion beams greater than 318.nA/mm2, 99.9% beam attenuation (3 grids) Electron Suppression Grid 99% transmission grid for electron suppression. Camera Systems Include camera, lens, mounting hardware and monochrome video monitor. BOS-OPT02/2622 (COHU 2622)BOS-OPT02/2712 (COHU 2712)BOS-OPT02/3710 (CIDTEC 3710D)CustomCustomer Specified Image Processing System Video monitor, PCI bus Frame grabber, Image Processing Software Power Supplies: Type: Bench Top (Economical)19" Rack MountSingle MCP, 0-1kVDual MCP, 0-2kVPhosphor Screen, 0-5kV Contact Information Name:* Company/Institution:* Address: Address (Cont.): Email Address:* Phone:* Fax: Questions/Comments:
